Operating instructions for the electric waste remover:

1. Always operate the machine with both hands and ensure a clean and tidy working environment.
2. Run the electric carton waste stripper for 30 minutes, then allow a 1-minute rest period to facilitate heat dissipation and provide the operator with a corresponding break.
3. Prior to each day’s operation, lubricate the chain and gear, and clean the machine’s surface.
4. Ensure that there is no paper gauze obstructing the air suction and exhaust holes on the body and motor to maintain unobstructed exhaust and heat dissipation channels.
5. When using the carton waste stripper machine, ensure that the cutter die is configured to separate the waste edge, thus ensuring effective waste cleaning.

 If the electric waste stripper machine fails to power on, follow these steps:

Try plugging the power plug into another outlet to ensure the socket is functioning.
Inspect the circuit connections for any loose or detached wires by opening the switch screws and insulation cover.
Check for any short-circuits or disconnections in the main power cord. If found, cut off the affected section and reconnect.
Verify if the switch is receiving power, using a multimeter for measurement.
If the issue persists, seek assistance from the professional electric waste stripper machine technical consultant at Shenzhen Huaxu Machinery Co., Ltd. via email: sulli@szhsu.com.